Services / Utility locating & mapping

Underground Utility Locating & Mapping in Florida

Private utility locating, designation, mapping and verification support for drilling, design, construction and demolition planning.

Call (727) 328-0268

Based in St. Petersburg · Project scope and coverage confirmed with your team

Field crew using locating equipment beside a building and utility infrastructure

Locate, designate & verify

Field information for planned ground disturbance

Methods matched to the project

What is underground utility designation?

Utility designation uses available records and field methods to identify and mark the interpreted position of underground utilities. Ambient’s published services include private utility clearance, Level B subsurface utility designation studies, GPR and electronic locating, mapping, and vacuum excavation for project-specified verification.

A coordinated clearance scope

  • Locate Review records and use suitable locating methods.
  • Verify Scope soft digs, potholes or trenches where exposure is needed.
  • Map Agree the field markings and design or construction deliverables.

Private utility locating & designation

Use GPR and electronic utility locator technologies for project-site clearance and designation studies, including proposed environmental and geotechnical sampling locations.

Vacuum excavation & verification

Project-specified soft digs, potholing and trenching can expose utilities at selected locations for verification before intrusive work.

Mapping & design support

Define AutoCAD figures, designation records and mapping requirements for design/build, pre-demolition or construction coordination.

Beyond a utility-line search

The published scope also covers investigation of underground storage tanks, buried drums and debris, utilities in concrete slabs, and areas of possible pipeline failure. Borehole logging provides a separate way to collect structural-geology or well-integrity information.

Agree what the clearance covers

Define the survey boundary, proposed intrusive locations, records available and verification needed. Geophysical detection and physical exposure provide different information; agree any limitations and follow-up verification with the project team before drilling or excavation.

Drilling fieldwork following utility clearance in the published Citrus Bay and Tiger Bay project
The published case describes utility clearance before the drilling shown.

Selected project / Citrus Bay & Tiger Bay solar-farm sites

Utility clearance before geotechnical drilling

At the Duke Energy Citrus Bay and Tiger Bay sites, the published case records the Ambient Technologies and GeoView team using GPR, electronic locating and vacuum excavation before conventional geotechnical drilling. This is utility-clearance and drilling experience at solar-farm sites.

Read the utility-clearance and drilling case →
GPR Subsurface screening Ground-penetrating radar was part of the recorded clearance scope.
EM Electronic locating Electronic locating complemented the GPR survey.
VAC Physical verification Vacuum excavation preceded drilling at the planned locations.

Prepare for mobilization

Send the site plan and proposed intrusive locations

Tie the locating request to the work that will follow it.

  • Limits and known infrastructure

    Survey boundary, site address, available utility records, building access, surface conditions and known services.

  • Verification and field coordination

    Proposed drilling or excavation locations, requested exposures, depths where known, restoration and traffic or facility restrictions.

  • Maps, records and timing

    Required field markings, AutoCAD or mapping format, reference information, contacts and schedule. Identify any separate well-installation or abandonment permit task if the wider program includes wells.

Based in St. Petersburg

Project coverage

Ambient supports utility-related field programs from St. Petersburg. Review the Florida service areas and confirm access, verification needs and coverage for the site.

View all Florida service areas →

Explore connected field services

Useful before you start

Questions before mobilization

Practical answers to help define the scope.

Does locating include vacuum excavation?

Vacuum excavation, soft digs, potholing and trenching are separate scope items. Identify the locations and physical verification required so they can be included in the field plan.

Can utility locating be coordinated with drilling?

Yes. Ambient’s published services include clearance of proposed environmental and geotechnical sampling locations. Define the proposed intrusive locations, locating coverage and verification requirements before mobilization.

Can the results be supplied for design or demolition planning?

The published offering includes AutoCAD figures for design/build and pre-demolition studies. Agree the mapping limits, reference information, required format and deliverables during scoping.

Plan the next field program

Planning a project that may use Underground Utilities Location, Designation and Mapping?

Tell us where the work is located, what the field program needs to accomplish and when support is required.

Request a Scope ReviewEmail Project Details

Prefer to talk?Call (727) 328-0268

  • Site location and access
  • Methods, quantities and depths
  • Schedule and requested records
Project inquiry

Tell us about the field program.

Share what you know now. The team can follow up about missing scope, access or scheduling details.

Privacy Statement.

Required fields are marked with an asterisk. Please do not submit confidential or regulated information.